Indian Science Technology and Engineering facilities Map
 
Preivious Next  

  Digital Catalogue for Technology and Products Development


   Technology and Product Development

    Basic Information

Technology developed: Tractor Driven Portable Feed Block Maker (TP19766986187)
Category: Product(Hardware/Material/Software)
Details of Inventor(s):
Inventor Institution/Organization/Company Department Designation
Putan Singh ICAR-IVRI, Izatnagar Animal Nutrition Division Principal Scientist
A.K. Verma ICAR-IVRI, Izatnagar Animal Nutrition Division Principal Scientist
S.S. Tripathi ICAR-IVRI, Izatnagar F,T, Unit CTO
Harish Yadav ICAR-IVRI, Izatnagar Farm Workshop CTO
Mukesh Singh ICAR-IVRI, Izatnagar LPM Section Principal Scientist
G.K. Gaur ICAR-IVRI, Izatnagar LPM Section Principal Scientist
Technical Application Area: Agricultural
If 'Other', please specify:
Animal Nutrition
Please give more details of new technical application area:
To improve the feeding value of crop residues various technologies are adopted. These could be broadly classified as follows Increasing the protein content by addition of non proteinous nitrogen sources like urea ammoniation techniques. Improving the digestibility through physical means like chopping, grinding, etc. Supplementing crop residue with tree fodder or concentrates and feeding either as complete feed in the form of mash, pellets or compressed blocks. In the preparation of enriched crop residue based feed blocks, all the above technologies are woven together in one way or other. The urea treatment of straws by and large increases the crude protein content two to three fold. With wheat straw, urea treatment increased the crude protein from 3.9 to 9.8 percent. According to Verma et al. 1996, feeding compressed complete feed blocks to Murrah buffaloes resulted in higher intake of DM, digestible DM and all other nutrients than feeding the diet in mash form and also resulted in a higher retention of calcium and phosphorus. Tractor driven portable feed block maker has advantages over Stationary type feed block making machine that it can move field to field for compressing the wheat straw blocks otherwise wheat straw in loose form has to be brought near to fixed or stationary type of block making machine. It is operated by the hydraulic pressure of the tractor so it is very cost effective and easily operational.
Organization(s):
ICAR Indian Veterinary Research Institute (IVRI) Izatnagar Bareilly
Affiliated Ministry: Institution Funding (Self Supported)
Type of technology development: Indigenous
Does the technology help in replacing any import items currently
procured from outside India?
No
Does the technology have export potential? Yes
Category of Technology developed: Immediate Deployment
Stage of Development: Field Test
Please describe in detail including the TRL Level:
Technology assigned to Agrinnovate India Ltd., New Delhi, for technology transfer or commercialization.

    Abstract:

Applications: Presently, there is no standard machinery available for making feed blocks. Most of the machines employ a screw or hydraulic pressure Yadav et al., 1993 for making blocks, whereas Berwal et al. 1993 used a hand operated machine. Parveen Kumar et al. 2004 employed a densifying machine where the time taken for each blocks of 05 kg was five minutes and the dimension of the jacket was 12 x 12 x 18 inches. Singh et al., 2004 made compacted blocks using a feed block formation machine. It consisted of a feeding chamber, compression chamber, feed block retention chamber, hydraulic cylinders, power pack and electric control panel. They reported that feed blocks of square cross section 20 x 20 cm and of varying thickness for all kinds of feed materials could be prepared using this machine. These are stationary type of feed block making machines so they cannot be ported from one place to another place. Keeping in mind this drawback we have developed Tractor Driven Portable Feed Block Maker, which can go to the places where wheat straw is being threshed out under field conditions and moreover, tractors are available at every village. The densified complete feed block technology offers a variety of benefits to the farmers and the feed manufacturers. This could be a promising technology for the regions where there is a perennial shortage of green forage and the dry roughages is also in short supply and is being transported from outside.
Advantages: The advantages are a promising way to feed a balanced ration to ruminants, an efficient nutrients delivery system less feed wastage, time as well as labour saving respite to women, feed as blocks require lesser storage space, densified feed cheaper and easier to transport, better way to manage crop residues and reduce pollution, improved productive and reproductive performance, lesser methane emission from animals, better health status, feed banks can be set up as a pre emptive disaster management measure, scope for value addition blocks as a vehicle for medicine or neutraceutical administration and better economic returns through providing stability in feed and milk prices.

    Technology Inputs:

Imported Equipment/Spare Parts:
Equipment/Spare Parts Year ITC-HS Code
NA
Indigenous Equipment/Spare Parts:
Equipment/Spare Parts Year ITC-HS Code
NA
Imported Raw Materials:
Raw Materials Year ITC-HS Code
NA
Indigenous Raw Materials:
Raw Materials Year ITC-HS Code
NA
Existing R&D Facilities used:
Facilities Year ITC-HS Code
NA

   Patents & Publications:

Patents:
Filed Patents (No.) Granted Patents (No.) Year
1 1 2015-16
Publications:
Submitted (No.) Published (No.) Year
0 0 NA

    Commercialization Potential:

Who are the Potential Licensees? Agriculture Appliances Fabricators Pvt Ltd Company
What commercially available products address
the same problem?
Company Product Problem Addressed
Stationary machines replaced with Portable Tractor Driven Machine
Would you like to develop this invention further with
corporate research support?
No
Would you be interested in participating in cluster based
programs for commercialization research or business
planning for your invention?
No
      Submitted by: The Director Date of Submission: 19-8-2020



Chat Room      Write Review     Talk to Experts


THE VISION
THE MISSION
ABOUT I-STEM
It has always been the basic tenet of the Government of India, in generously funding R&D efforts at academic institutions over the years, that facilities established through such support be made available to those needing them and qualified to make use of them for their own research work
read more >>

However, this was never easy or straightforward for, among other reasons, there was no ready source of information of what facility was available and where. Thanks to the Web, it is much easier today to have a national and regional “inventory of resources”, so as to match users with the resources they need, and to do all this in an efficient and transparent manner.

This can lead to a leap in R&D productivity and greatly enhance the effectiveness of public investment. This is the motivation behind I-STEM.
read less <<
Visitor Hit Counter
Hosted at Indian Institute of Science
Copyright © 2024 I-STEM. All rights reserved.
Audited by: STQC Bengaluru.